Add Dkc Dialog Box - HP XP P9500 User Manual

Item
Port
Pair-Port
S/N
Controller ID
Path Gr. ID
M-R Path
Minimum Paths
RIO MIH Time
DKC Registered
Last Updated Time
Refresh the DKC
Operation tab after
this panel is closed

Add DKC dialog box

This dialog box lets you configure local and remote systems for Continuous Access Journal pairs.
See "Configure storage systems for Continuous Access Journal, define logical paths " (page 45)
for complete information.
Description
Port on the local system.
Port on the remote system.
Serial number and LDKC number of the remote system.
Controller ID and model name (in parenthesis) for the remote system.
Path group ID
Type of channel interface between local and remote systems. Always displays column displays
"Fibre".
Minimum possible number of paths between the local and the remote systems.
Remote I/O missing interrupt handler timer value—the wait time for data transfer from the local
to remote system to complete.
Date and time when local and remote systems were associated to each other
Date and time the last operation on a logical path to the remote system was performed.
When clicked, the DKC Operation window refreshes when it redisplays.
DKC Operation window 175