RCU Option dialog box
This dialog box lets you change data path parameters: the minimum number of paths, RIO MIH,
FREEZE Option, and Round Trip Time options.
See the procedure
RIO MIH Time (sec.)
Round Trip Time (ms)
Add Path dialog box
144 Continuous Access Synchronous Z GUI reference
"Configure disk arrays and define logical paths" (page 46)
Where minimum number of paths is defined.
Where the time is defined in which the copy operation must complete, otherwise the operation
fails. Options are 10 to 100 seconds.
Where to define that the support for the CGROUP (FREEZE/ RUN) PPRC TSO command is
enable or disable.
Where the time limit is defined for data to travel from the M-VOL to the R-VOL.