Select Devices - HP XP P9500 User Manual

Example 12 GetHrcStatus command
GetHrcStatus $Dev=0x00004a
_sMsgB=_HrcStatus_Fence
_sMsgC=_HrcStatus_Sync
_sMsgD=_HrcStatus_Sn
_iNumB=_HrcStatus_Ssid
_iNumC=_HrcStatus_DeviceR

Select devices

The SelectHrcDevice command allows you to search for pairs whose status matches the
specified parameters. The SelectHrcDevice parameters include:
SelectHrcDevice∆$DevList= Output list
,$Dev= Device list
[,$RcuSn= Serial number list]
[,$RcuSsid= SSID number list]
[,$Fence= Fence level list]
[,$Sync= Sync level list]
[,$PairStatus= Pair status list]
[,$DevAttr= Device attribute list]
[,$OptErrLv= Error level list]
[,$CTG= CT group list]
[,$Seqchk= SEQCHK flag list]
The Details for the arguments are:
Output list (list type and numeric work variable)
The SelectHrcDevice parameters include:
Device list (numeric): list of devices to be searched: L x 0x10000 + C x 0x100 + VV, where
L=LDKC#, C=CU#, VV=vol# within CU. Default = all possible target devices that can be
specified. The maximum number of devices is 1,024. If you want to search for more than
1,024 devices, repeat this command for several times.
When you write device list, you can omit LDKC# if the LDKC# is 0. For example, you can
write 0x0102 when LDKC# is 0, CU# is 1, and vol# is 2.
Serial number list (string): RCU serial number. Default = not specific.
SSID number list (numeric): RCU SSID. Default = not specific.
Fence level list (string): "N" or "Never" = never; "S" or "Status" = status; "D" or "Data" =
data. Default = not specific.
Sync level list (string): "S0" or "Synchronous0" ; default = S0.
Pair status list (string): "Simplex", "Pending", "Duplex", "Suspended0" (suspended during
initial copy), "Suspended1" (suspended after initial copy), "Suspended" (all suspend types),
"Suspending", "Deleting", "Undefined". Default = not specific.
NOTE:
Disk Array/XP10000 Disk Array, "Suspending" and "Deleting" has been left. These parameters
are not effective in P9500.
Device attribute list (string): "M" or "M-VOL", "R" or "R-VOL". Default = not specific.
Error level list (string): To maintain interchangeability with the script made with the model
before XP12000 Disk Array/XP10000 Disk Array, this parameter has been left. Do not use
this parameter with P9500.
To maintain interchangeability with the script made with the model before XP12000
Operation macro commands 1 15