Dkc Operation Window - HP XP P9500 User Manual

Item
Journal
Mirror
P-VOL/S-VOL
CLPR
Internal/External
VOL
Status
Sub Status
SEQCHK Only
Reset
Set
Cancel

DKC Operation window

This window lets you view details about the remote storage systems, logical paths between systems,
and ports on the local system.
Information on the DKC Operation window will be updated when you do one of the following:
Click Apply.
Select another tab and then reselect the DKC Operation tab.
170 Continuous Access Journal Z GUI reference
Description
The journal to display. All shows all journals.
Mirrors to display. All shows all mirrors.
The type of pair volume to display, P-VOL or S-VOL.
The cache logical partition to display. CLPRs are used to segment the cache that is assigned to
parity groups. If you select All, all CLPRs display in the list
Whether internal volumes or external volumes display. All shows both kinds of volumes
The pair status or statuses to display.
The consistency status to display. The volume pair that corresponds in the specified status is
displayed in the list.
Whether only pairs in SEQCHK status display. This status is shown for a pair assigned to a
mirror and with the System timer type that accepts a non-time-stamped update from the primary
system. The SEQCHK status does not affect copy activities and is removed when the next
time-stamped update is successfully copied to the S-VOL. But if a disaster or system failure occurs
before the next time-stamped update, the update sequence consistency between the S-VOL and
other S-VOLs in the mirror is not ensured.
Restores all options to the defaults.
Applies the settings to the Preview list in the Pair Operation window.
Discards the settings and closes the dialog box.