HP XP P9500 User Manual page 171

Close the DKC Status window.
Click File > Refresh on the menu bar.
Select Modify mode when you are in View mode.
Use the DKC Operation window to:
"Configure storage systems for Continuous Access Journal Z, define logical paths " (page 57)
"Configure additional logical paths " (page 59)
View one of the following:
"Remote Systems Information " (page 172)
◦
"Logical Path Information" (page 173)
◦
◦ "Port Information for the local system" (page 173)
NOTE: DKC is an acronym for disk controller, which controls an entire storage system. Cnt Ac-J
Z windows use the term "DKC" to indicate a storage system.
LDKC is an acronym for logical disk controller, and it also may be called logical DKC. LDKC is a
controller that controls a logical storage system that exists in P9500. In the Cnt Ac-J Z window, the
term "LDKC" indicates a logical storage system.
Item Description
Display Changes information in the DKC Operation window.
Tree Shows either of the following, depending on the selection in Display.
Operation Shows information about one of the following, depending on what is selected in Display and
Tree:
DKC shows information about the remote storage systems and the logical paths.
Port shows information about ports on the local storage system.
Remote storage systems.
Channel adapters on the local storage system and port attributes.
Remote storage systems. See
Logical paths. See "Logical Path Information" (page
Ports on the local storage system. See
"Remote Systems Information " (page
173).
"Port Information for the local system" (page
172).
173).
DKC Operation window 171