HP XP P9500 User Manual page 175

Item Description
No Number of the row.
Path Status Status of a logical path.
Normal. The path is established and ready to use for copy operations.
In Progress. An operation for configuring or deleting the path is in progress.
Initialization Failed. An error occurred when the connection between local and remote
systems was initializing. The probable causes are:
- No cable is connected to the local system.
- No cable is connected to the remote system.
- No cable is connected to the network device between the two systems.
Communication Time Out. This status indicates one of the following:
- A timeout error has occurred between the primary and the secondary storage systems.
- A logic error is detected between the primary and the secondary storage systems.
Port Rejected. The local system rejected configuration of the logical path connection. Logical
path resources in the local system might be in use for other connections.
Pair Port Rejected. The remote system rejected configuration of the logical path connection.
Logical path resources in the remote system might be in use for other connections.
Serial Number Mismatch . The serial number of the storage system connected to this logical
path does not match the serial number specified by the Add DKC dialog box.
Invalid Port Mode. The port is not an initiator port.
Pair-Port Number Mismatch. Indicates one of the following:
- The specified port number is incorrect.
- The port in the remote system is physically disconnected from the local system.
Pair-Port Type Mismatch . The port on the remote system is not an RCU target port.
Communication Failed. A communication timeout error has occurred on the path between
the local and remote systems.
DKC Operation window 175