Accessing Through The Telnet Interface - HP Surestore 6164 - Switch User Manual

Accessing Through the Telnet Interface

Example:
Using Remote Switch
You can use the Telnet command
• Set the R_A_TOV and E_D_TOV values.
• Set the data field size.
• Set the Class F frame suppression flag.
You must disable the switch prior to entering the
switch:admin> configure
Configure. . .
Fabric parameters (yes, y, no, n): [no] yes
Domain:
BB credit:
R_A_TOV:
E_D_TOV:
Data field size:
Non-SCSI Tachyon Mode:
Disable Device Probing:
Suppress Class F Traffic:
In this example, the default value is accepted for R_A_TOV.
configure
(1. .239) [2]
(1. .16) [16]
(4000. .120000)
(1000. .5000)
(256. .2112)
to accomplish the following:
command.
configure
[10000]
[2000]5000
[2112]
(0. .1) [0]
(0. .1) [0]
(0. .1) [0]
2048
1
19