Using The Flash (Flash Modes) - Nikon COOLPIX S9300 Reference Manual

Features That Can Be Set Using the Multi Selector
Using the Flash (Flash Modes)
You carl set a flash mocte that suits tile shooting conditions.
1 Press • (_ flash mode) on the multi selector.
2
Use the multi selector to select the desired
mode and press the @ button.
• See "Available Flash Modes" ([]_161) for more
information.
• If the _) button is not pressed within a few seconds,
the selection will be canceled.
• When iAIITn ( auto) is applied, _ is only displayedfor
afew seconds,regardlessof Photo info settings
(_100).
3 Frame the subject a ndtakea picture.
• The flash lamp indicates the status of the flash when
the shutter-release button is pressed halfway.
- On: The flash will fire when you press the
shutter-release button all the way.
- Flashing:The flash is charging. The camera cannot
take pictures.
- Off: The flash will not fire when a picture is
taken.
• If the battery is low, the monitor will betumed offwhile
the flash is charging.
6O
[] Effective Range of the Flash
The flash has a range of about 0,5 to 5,1 m (1 ft 8 in, to 16 ft) for wide angle position, and about 1,5 to
3.0 m (5 ft to 9 ft 10 in.) for telephoto zoom position (when ISO sensitivity is set to Auto).