Nikon COOLPIX S9300 Reference Manual page 103

Using ViewNX 2
Transferring Images to the Computer
1 Choose how images will be copied to the computer.
Choose one of the following methods:
• Direct USB connection: Turn the camera off and ensure that the memory card is
inserted in the camera. Connect the camera to the computer using the included USB
Cable UC-E6.The camera automatically turns on. To transfer images that are saved in
the camera's internal memory, remove the memory card from the camera before
connecting it to the computer.
• SD card slot: If your computer is equipped with an SD card slot, the memory card can
be inserted directly in the slot.
• SD card reader: Connect a card reader(avai]ab]eseparateJyfrom third-party
suppliers) to the computer and insert the memory card.
Ifa message is displayed prompting you to choose a program, select Nikon Transfer 2.
• When using Windows 7
If the dialog shown at right is displayed,
follow the steps below to select Nikon
Transfer 2.
1 Under Import pictures and videos, _ ........ ............
did< Change program. A program
selection dialog will be displayed; select
Import File using Nikon Transfer 2 and click OK.
2 Double-clicklmport File.
If the memory card contains a large number of images, it may take a while for Nikon
Transfer 2 to start. Wait until Nil<on Transfer 2 starts.
2-
e_
Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USBhub.
85