Nikon COOLPIX S9300 Reference Manual page 57

Scene Mode (Shooting Suited to Scenes)
Changing Scene Mode Settings
• "Features That Car] Be Set Using the Multi Selector" (_59) vary with scene
mode. See "List of the Default Settings" (_69) for more information.
• Functions that can be set using tile MENU button: Tile combination of image size
and image quality (Image mode) (_71) (except for Easy panorama and 3D
photography).
Characteristics of Each Scene Mode
• Use of a tripod is recommended in scene modes with I_ indicated. Set
Vibration reduction in tile setup menu (_100) to Off when using a tripod to
stabilize the camera.
[r_ Scene auto selector
When you frame a picture, the camera automatically selects the optimum scene for simpler
shooting.
I_t: Portrait, I'FI_: Landscape, I'_: Night portrait, _: Night landscape, rJ_: Close-up, _:
Backlighting, D: Other scenes
• When the camera automatically selects a scene mode, the shooting mode icon changes
to that for the scene mode currently enabled.
• The camera automatically selects the focus area for autofocus in accordance with the
composition. The camera detects and focuses on faces (see "Using Face Detection"
(_,_75) for more information).
• Depending upon shooting conditions, the camera may not select the desired scene
mode. Should this occur, switch to I_1 (auto) mode (_24) or select the optimum scene
mode for the subject manually.
• The digital zoom is not available.
o
5"
[] If Night Landscape or Night Portrait Is Selected When Shooting with
Scene Auto Selector
• If the camera switches to _ (Night landscape), the flash switches to off (_ (off)) regardless of
the flash mode setting and the camera shoots a single picture at slow shutter speeds.
• Ifthecamera switchesto I'_ (Night portrait),theflash mode switchesto slowsync with red eye
reduction fill flash and the camera shoots a single picture at slow shutter speeds.
39