Installing The Automatic Document Feeder - Epson 1600 User Manual

Installing the Automatic Document Feeder

Follow the steps below to install the Automatic Document Feeder
on your EPSON scanner.
1. Make sure your scanner is turned off, and unplug the
scanner's power cord.
2. Remove your scanner's document cover by holding the cover
behind the hinge and lifting the back of the cover straight up.
(See page 4-6)
3. The scanner comes with two installation screws attached;
slide the mounting slots on the Automatic Document Feeder
forward, underneath these two screws. Do not remove the
protective materials from the Automatic Document Feeder's
mounting hardware yet.
6-18
Options