Scanning Normal (Reflective) Documents - Epson 1600 User Manual

Non-standard film sizes
Place the film directly onto the scanner's glass document table,
making sure the glossy (smooth) side of the film is facing down.
Note:
When you place the film directly on the document table, make sure
to set the focus position to 0.0 in EPSON TWAIN Pro.
An area approximately 1.6mm in from the horizontal and 1mm in
from the vertical edges of the document table glass will not be
scanned.

Scanning normal (reflective) documents

When you return to scanning normal reflective documents, you
should always insert the reflective document mat included with
this unit. Also, make sure you remove the transparency guide
from the scanner's document table.
Insert the reflective document mat as described below.
1. Open the Transparency Unit.
6-15
Options
6