Software setup problems
You cannot install EPSON TWAIN Pro.
Cause
System configuration does
not meet the requirements.
The scanner does not appear in the Port list of the EPSON
TWAIN Pro dialog box in the Control Panel when you connect
the SCSI model to your PC running Windows other than
Windows 98.
Cause
SCSI connection is not made
properly.
SCSI ID number is
unsuitable.
Connection sequence is
incorrect.
7-18
Maintenance and Troubleshooting
What to do
Check if your computer and operating
system meet the system requirements
on pages 3-2 to 4.
Make sure your computer has enough
memory to run the application.
What to do
Turn off the computer and scanner
and check the connection between
your hardware.
Change the SCSI ID number to one
that is not being used by any other
SCSI device.
Check the connection sequence and
make sure the scanner's terminator
switch is set correctly. See Chapter 2
for details.