Sharp FO-DC500 Facsimile Operation Manual page 86

Sending an Image Using a Rapid Key or Speed Dial Number
3
If the destination is an e-mail
destination and you wish to enter a
message, or change the sender name
or e-mail address, or select the file
format for the document, press
WITHIN 5 SECONDS after pressing the
Rapid Key in Step 2.
(After 5 seconds, the document will be
scanned and transmitted using the
settings that were stored in the Rapid
Key.)
4
Press
START/
. Change the selected option as follows:
ENTER
•
FROM
Enter your name, press
•
FILE FORMAT
Press
and compression (G3, G4 or NO COMPRESSION), and then press
•
MESSAGE
Use the letter entry keys to enter a message (maximum of 256 characters).
A line break can be entered by pressing
5
When you have finished changing the
options, press
START SCANNING.
6
START/
Press
ENTER
84
to select the option you want to change, and then press
START/
ENTER
to select the desired combination of file format (TIFF or PDF)
or to select
to begin scanning and transmission.
1:START SCANNING
2:FROM
XXX
3:FILE FORMAT
XXX
4:MESSAGE
NO MESSAGE
, enter your e-mail address, and press
. When finished, press
1:START SCANNING
2:FROM
XXX
3:FILE FORMAT
XXX
4:MESSAGE
NO MESSAGE
START/
.
ENTER
START/
.
ENTER
START/
.
ENTER