Sharp FO-DC500 Facsimile Operation Manual page 175

Setting 05: TRANSACTION REPORT PRINT SELECTION
This sets the condition for printing out a Transaction Report. Press
to select one of the following conditions, and then press
ERROR/TIMER/
MEMORY:
SEND ONLY
ALWAYS PRINTS
NEVER PRINTS
.
ERROR ONLY
♦
Initial setting: ERROR ONLY
Note: Settings 06 and 07 are not used.
Setting 08: SECURITY SELECTION
Select ON to turn polling security on, or OFF to turn it off. Press
to make the selection and then press
♦
Initial setting: ON
Setting 09: ERROR CORRECTION MODE (ECM)
Select YES to have any distortions in a transmission due to noise on the
telephone line corrected before print-out at the receiving end. This is only
effective when the other machine has ECM as well. Select NO to turn the
function off. Press
Note: If the transmission or reception is taking place in Super G3 mode, ECM
will operate regardless of the ECM setting.
♦
Initial setting: YES
A report will be printed after an error, timer
operation, or memory operation
A report will be printed only after a
transmission
A report will be printed after each
transmission, reception, or error
A report will never be printed.
A report will be printed only after an error
occurs
START/
.
ENTER
or to make the selection and then press
Optional Settings
or
START/
ENTER
or
START/
.
ENTER
173