Sharp FO-DC500 Facsimile Operation Manual page 61

♦
Poll one or more fax machines using Rapid Keys and Speed Dial numbers
from your book (see page 138).
♦
Set up a timer operation using a Rapid Key or Speed Dial number from your
book (see page 146).
♦
Print out the Destination List, Program/Group List, or Timer List (see page
180). When printed from your book, these lists will show the corresponding
information in your book.
♦ REDIAL
Press
♦
If the network scanner option is installed, you can program any Rapid Key
or a Speed Dial number from 1 to 16 for Scan to E-mail as explained on
page 83, and use the Rapid Key or Speed Dial number to send a document
to an e-mail recipient as explained on pages 83 and 85.
Closing a book
A book will automatically close when the operation performed from the book is
completed. If you need to close a book before performing an operation, press
STOP
. The display will show:
Make sure that YES is selected and then press
♦
If an operation is not performed within one minute after opening a book, the
book will automatically close.
Cancelling an operation performed from a book
To cancel an operation that was set up from a book, you must first open the
book (as explained on page 58) and then cancel the operation.
For example, if you need to cancel a fax transmission that was performed
from a book, open your book and then cancel the operation as explained on
page 52 or 53. Note that the job status of the fax can be checked without
opening your book.
To clear a Rapid Key or Speed Dial number in a book, open the book and then
clear the key or number.
to redial the last number dialled from your book.
CANCEL BOOK?
1=YES
2=NO
Creating and Using Personal Books
START/
.
ENTER
59