Sharp FO-DC500 Facsimile Operation Manual page 181

paper in the selected paper source. To turn off Seperate mode, press
to select NO and then press
automatically if the selected paper source runs out of paper.)
Note: This setting is only available if your dealer has installed the paper cassette
option.
♦
Initial setting: NO
Note: If you turn off the Separate Mode setting, Option Setting 16 will
subsequently appear in the display to allow you make an appropriate setting for
cassette selection. If you don't make a selection, AUTO SELECTION will be
automatically selected.
Setting 32: BACKLIGHT SETTING
Use this setting to set the amount of time until the display backlight turns off
after the operation panel is used (after a key is pressed). Press
to select the amount of time (3 MINUTES, 10 MINUTES, or 15 MINUTES), or
select ALWAYS OFF if you never want the backlight to be on. When finished,
START/
press .
ENTER
♦
Initial setting: 3 MINUTES
START/
. (Note that the function will turn off
ENTER
Optional Settings
or
or
179