Automatic Redialling - Sharp FO-DC500 Facsimile Operation Manual

Sending a Fax by Automatic Dialling

Automatic redialling

If you use automatic dialling (including Direct Keypad Dialling) and the line is
busy, the machine will automatically redial the number. The machine is set at
the factory to make 2 redialling attempts at intervals of 5 minutes.
To cancel automatic redialling, cancel the job as explained in Checking and
cancelling stored transmission jobs on page 52.
♦
Under certain conditions (for example if a person answers the call on a
telephone), automatic redialling may stop before two redialling attempts are
made.
Memory Retransmission
If a line error occurs during any type of memory transmission, your fax will
automatically redial the number and attempt to complete the transmission.
Retransmission will begin from the page which was being transmitted when
the error occurred.
The fax machine will make 2 retransmission attempts at intervals of 5 minutes.
♦
The numbering of pages retransmitted will begin from "1" again.
♦
If an error or power failure occurs during transmission of a cover sheet,
retransmission will not take place.
♦
To cancel retransmission, cancel the job as explained in Checking and
cancelling stored transmission jobs on page 52.
54