Sharp FO-DC500 Facsimile Operation Manual page 43

3
START/
Press . Make sure that SET is
ENTER
selected.
4
START/
Press .
ENTER
5
To program a Rapid Key number, press the Rapid Key that you wish to
use. (To select Rapid Keys 40 through 59, flip up the Rapid Key overlay.)
To program a Speed Dial number, press
number that you wish to use ("1" to "100"). (If you enter less than three
START/
digits, press
ENTER
6
If the network scanner option is installed, SELECT DESTINATION TYPE
will appear in the display. Make sure that "FAX" is selected (press
or if needed), and then press
(To program an e-mail address in an auto-dial number, see page 83.)
7
Enter the fax number by pressing the numeric keys (maximum of 60
digits including pauses).
•
To clear a mistake, press
•
If a pause is required between any of the digits to access a special service
or an outside line, press
appear as a hyphen. Several pauses can be entered in a row.
8
START/
Press .
ENTER
to complete the entry.)
START/
ENTER
.
DEL
REDIAL
(two seconds per pause). The pause will
Programming Auto-Dial Numbers
DESTINATION SETTING
1=SET
2=CLEAR
DESTINATION SET
PRESS RAPID OR SPEED
SPEED DIAL
and then enter the
.
41