HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT
*When replacing the Plasmacluster Ion Generating Unit, be sure to turn off the
main unit, unplug the power cord, and never handle the plug with wet hands.
1
Remove the 2 screws by the one like the coin, and open the Cluster Door.
2
Remove the Plasmacluster Ion Generating Unit by the handle.
Plasmacluster Ion
Generating Unit
3
Replace the new Plasmacluster Ion Generating Unit.
Fix it into the main unit firmly.
*Never touch the connector terminal of Plasmacluster Ion Generating Unit.
*After replacing the Plasmacluster Ion Generating Unit, press the Operation
Button.
Fill the replacement date on the label of side of the main unit.
2 screws
E-7
Need help?
Do you have a question about the Plasmacluster IG-BL20E and is the answer not in the manual?