How To Replace Plasmacluster Ion Generating Unit - Sharp IG-DX10A Operation Manual

HOW TO REPLACE PLASMACLUSTER ION GENERATING UNIT

Before replacement, be sure to turn off the product, unplug the power cord, and
never handle the plug with wet hands.
Remove the Unit Cover.
1
Pull out the Unit Holder.
2
Remove the Plasmacluster Ion
3
Generating Unit.
Turn the Unit Holder and the Plasmacluster
Ion Generating Unit to the direction indicated
by an arrow and remove the Plasmacluster
Ion Generating Unit.
Replace with a new Plasmacluster
4
Ion Generating Unit.
Insert the unit holder in the main
5
unit and attach the unit cover.
Insert the AC Adapter in an outlet and press the Operation
6
Button. Check the Unit Replacement Light is OFF.
• Discard an old unit as nonburnable garbage.
• At the region where there is waste separation rule, follow the rule.
Click
E-12
Unit Cover
Plasmacluster Ion
Generating Unit
Unit Holder
Plasmacluster Ion
Generating Unit
Unit Holder