Storing Numbers For Automatic Dialling - Sharp AR-F151 Facsimile Operation Manual

Storing Numbers for Automatic Dialling

Automatic Dialling is a quick and convenient way to dial by using only a Rapid key
(Rapid Key Dialling), or pressing the SPEED/SEARCH key and select the SPEED and
entering a two digit number (Speed Dialling).
To use Automatic Dialling, you must first store the full number. The way you store it
depends on whether you want to use it for Rapid Key Dialling or Speed Dialling:
Storing numbers
Use the following procedure to store numbers for Rapid Key Dialling or Speed Dialling:
Step Press these keys
1
FUNCTION
2
3
4
01
5
ENTER
ABC
6
ABC
TUV
(example: 2015298200)
7
ENTER
8
JKL
9
ENTER
DEF
(example)
JKL ABC WXYZ
ABC GHI
. . .
(example)
INITIAL SETTINGS
Comments
"ENTRY MODE" will appear in the
display.
"FAX NUMBER MODE" will appear in
the display.
"FAX NUMBER SET" will appear in
the display.
To store a Rapid key number, press a
Rapid key. To store a Speed Dial
number, press two number keys ("00"
to "99"). "PRESS ENTER KEY" will
appear in the display.
"ENTER FAX NUMBER" will appear
in the display.
Enter the fax number (maximum of 20
digits including pauses) using the
number keys.
"ENTER NAME" will appear in the
display.
Enter the name of the location or
party by pressing number keys as
described in "How to Enter
Characters " in this chapter (max. of
20 characters). If you do not want to
enter a name, skip this step.
"CHAIN DIAL" will appear in the
display.
Fax Setup
2-19