Troubleshooting; Troubleshooting - Sharp AR-F151 Facsimile Operation Manual

Problem
Dialling cannot be done.
No transmission takes place.
Nothing is printed at the receiving end.
A distorted image is received at the other end. Noise on the telephone line may cause
The received document is faint.
Received images are distorted.
COPY SERVICE ERROR
FAX SERVICE ERROR (#)
Note: If your problem cannot be solved by carrying out the instructions in the Check
and Remedy column above, please contact your SHARP dealer.

5. TROUBLESHOOTING

Troubleshooting

TROUBLESHOOTING

Check and Remedy
Make sure that the telephone line is properly
connected to both the unit and the wall socket.
Make sure that the receiving machine has
not run out of printing paper.
Make sure that the receiving machine is G3
compatible. (This information should be
included in the machine's documentation.)
Check the display for possible error
messages.
Make sure that the document you are
sending is fed into the unit in the correct
way.
Make sure that the receiving machine is in
working order.
distortion. Try sending the document again.
Make a copy of the document on the unit. If
the copy is also distorted, the unit may have
a problem.
Ask the other party to send higher contrast
documents. If the contrast is still too low,
make a copy with the unit to check it.
Noise on the telephone line may cause
distortion. Have the sending party send the
document again.
The drum cartridge may need replacement.
The copier will not function. Turn the power
switch off, remove the power cord from the
outlet, and contact your SHARP dealer.
The fax will not function. Contact your
SHARP dealer.
5-1