Table of Contents
Advertisement
STORING NUMBERS FOR AUTOMATIC DIALLING
Comments:
l
You may need to add a pause between certain digits in the number to allow time for
connection. For example, if
you
are on a PBX telephone system that requires an access
number to be dialled (such as ",I,) to access an outside line, you will need to enter a pause
between the access number and the telephone/fax number of the other party. Pauses are
entered by pressing the REDIAL key (2 seconds per pause). If necessary, several pauses
can be entered in a row.
l
To enter letters for names or correct a mistake, see "Entering letters for names" in this
chapter.
Step
;
Press these keys:
Comments
I
FUNCTION
1
i
(
0
ENTRY MODE will appear in the display.
2~
#
0
FAX/TEL !# MODE will appear in the display.
3~
a
Select SET.
4
~
To store a Rapid Key number, press a Rapid
Key.
To store a Speed Dial number, press two
(Example)
numeric keys ("01" to "30").
5
~
ta
fa
15)
fi)
a
:B
m
(Example)
Enter the fax number (max. of 20 digits including
pauses) using the numeric keys.
6
! If you are storing a Speed Dial number, go to
Step 9 after pressing START.
!
(5)
(5)
,QiJ
3
'3
!a
:a
Enter a full voice number (max. of 20 digits).
7
~
If you don't want to enter a voice number, skip
(Example)
:
this step.
Enter the name of the location or party by
g
!B:3)a...@J
pressing numeric keys as described in "Entering
Letters for Names" in this chapter (max. of 20
I
I
:
characters). If you don't want to enter a name,
1
(Example)
skip this step.
INITIAL SETTINGS
2-9
Advertisement
Table of Contents
