Sharp AR-F151 Facsimile Operation Manual page 40

Sending Documents
When placing the Original on the Table:
1
Confirm that there are no
documents in the SPF, and open
the original cover.
2
Place the document face down on
the original table. Align the
document according to the original
scale in the illustration below. (Line
up the centre of the edge of the
document with the ( ) mark.)
Original scale
3
Gently close the original cover.
Note: When using the original table, do not set documents in the SPF.
4
Press the BOOK SEND key.
5
Select the document size A4 or B4
from those displayed.
• You can now make resolution or
contrast settings as described in the
next section and dial and transmit the
fax. (See "Dialling and Transmitting"
in this chapter)
6
Press the BOOK SEND key to scan
the page into memory. If you have
more than one document to read
into memory, place the next page,
and press the BOOK SEND key to
read each page.
4-2
mark
HOW TO USE THE FAX FUNCTION
DOCUMENT SIZE?
1:A4 2:B4