Job Location Table; Working Time Shift - Sharp UP-800F Instruction Manual

■ Job location table

You can program three functions for each job location table number which is assigned to employees.
Procedure
▼
Pertinent job
location table number
▼

■ Working time shift

You can program the names for 9 working time shifts.
Procedure
▼
Pertinent working
time shift number
▼
Program each item as follows:
• JOB LOCATE TBL (Use the numeric entry)
Job location table number (1 to 99)
• TEXT (Use the character entry)
Description for the job location table
Up to 12 characters can be entered.
• SALARY AMOUNT (Use the numeric entry)
Salary amount paid for the employee (max. 5 digits: 0 to 999.99)
• * OVER-TIME RATE (Use the numeric entry)
Rate for overtime work (max. 4 digits: 0.01 to 99.99)
E
NOTE
* Overtime pay = SALARY AMOUNT x OVER-TIME RATE
Program each item as follows:
• WORKING TIME SHIFT (Use the numeric entry)
Working time shift number (0 to 9)
• TEXT (Use the character entry)
Description for the working time shift
Up to 12 characters can be entered.
E
169