Chapter 4. Changing Euro Function (X2/Z2 Mode Job) - Sharp ER-A410 Programming Manual

CHAPTER 4. CHANGING EURO FUNCTION (X2/Z2 mode JOB)

This job is own to be able to be changed easily from local currency
system to EURO currency system in X2/Z2 mode.
(Reading the current EURO status)
<X2/Z2 mode>
800 TL
(Changing EURO Function)
<X2/Z2 mode>
X
800
X: 1 = EURO STATUS (B)
2 = EURO STATUS (C)
3 = EURO STATUS (D)
[About EURO STATUS]
It is executing automatically to change from status (A) to status (B), (C),
(D).
Selectable type is one of below 4 types.
And the selectable type is decided as below for each status.
CURRENT STATUS
4
(A)
(A) —
(B) —
(C) —
(D) —
Marked "o" is selectable
TL
Selectable STATUS
(B) (C)
o o
o
—
— —
— —
ER-A410/ER-A420 CHANGING EURO FUNCTION (X2/Z2 mode JOB)
<Action>
It is executed some of below JOBs which is needed for each status.
1) Issue General Z1 report.
2) Issue General Z2 report.
3) Clear GT 1/2/3 and Training GT.
4) Convert the unit price of DEPT / PLU from LOCAL currency to
EURO.
If new unit price is over the max digits, its price is set as "0.00".
5) Convert the HALO amount and HALO digits from LOCAL currency
to EURO. If new HALO amount is over the max digits, its price is set
as "0.00".
6) Change PGM function "EX1 AMOUNT PRINTING FOR TOTAL
AND CHANGE YES / NO".
7) Change PGM function "EX1 AMOUNT PRINTING FOR TOTAL VP
YES / NO".
8) Change PGM function "EX1" CALCULATTION METHOD DIVISION
/ MULTIPLICATION".
9) Set "Domestic currency symbol" as EURO SYMBOL.
10) Set "Domestic TAB" as "2".
11) Set "EX1 currency symbol" as the suitable data.
12) Set "EX1 TAB" as the suitable data.
13) Set "Rounding SYSTEM (Denmark / Sweden / Normal)" as "Nor-
mal".
14) Set "Rounding up / down of the unit digits of AMOUNT" as "No".
(D)
o 15) Set "Lowest digit entering limitation of item" as "Arbitrary".
o
16) Set "Lowest digit entering limitation of payment" as "Arbitrary".
o
17) Set "Difference memory" as "No".
—
18) Set "Rounding of foreign currency for EX" as "Round off (4-DOWN,
5-UP)".(EURO Regulation)
Notes:
a) This JOB cannot set below additional EURO function automati-
cally.
Below items must be set by each PGM JOB after this job.
(1) EX1 RATE
(2) "CHECK, CREDIT operation for EX1 Yes / No"
b) When the unit price is converted, the rounding method of EURO
currency is fixed as "Round off (4-DOWN, 5-UP)". [EURO Reg-
ulation]
4 – 1