Function Key Programming - Sharp UP-800F Instruction Manual

Function Key Programming

Use the following procedure to select an option in the function key programming:
Procedure
▼
The following illustration shows those options included in the function key programming group.
13 FUNCTION KEY
* See "Function menu key list" for the function keys assigned to each function menu key by default.
1.
In the SETTING window, select "13 FUNCTION KEY".
• The FUNCTION KEY window will appear.
2.
Select an option from the following options list:
1 FUNCTION MENU KEY:
2 FUNCTION KEY:
1 FUNCTION MENU KEY
2 FUNCTION KEY
➡
See "Function menu key" on page 196.
➡
See "Function key" on page 198.
Function menu key
Function key
195