Supervisor Clerk - Sharp UP-800F Instruction Manual

Supervisor Clerk

This function is used to substitute a supervisor clerk for an ordinary clerk. The supervisor clerk can make
entry as an ordinary clerk by assigning the ordinary clerk code. You can use the supervisor clerk function
only for substituting for an ordinary clerk. This function is available only in the real clerk key system.
To use this function, insert a real clerk key assigned supervisor clerk, enter the ordinary clerk code and
˚
press the key. When you insert a supervisor clerk key and open an existing guest check, the original
clerk who usually controls the guest check will automatically be assigned.
• This function is unavailable when the "overlapped clerk function" is enabled.
NOTE
• When the supervisor clerk and the original clerk are entered, the operation in OPXZ, X1/Z1,
X2/Z2, PGM1, or PGM2 mode is inhibited.
Procedure
Inserting a supervisor
clerk key
Example
• When opening a new guest check (GLU code 1010) with this function:
Inserting a supervisor clerk key
(Clerk#12)
If it is programmed to display the clerk popup window ("CLERK POPUP" in FUNC.SELECT2
NOTE
menu), you can start the operation from a GLU code entry. After you press the
popup window will open for a clerk# entry.
• When receiving payment for the order stored in the GLU code 1010:
Inserting a supervisor clerk
(Clerk#12)
104
To open an existing guest check
Clerk code
(4 digits)
When working outside guest check
or opening a new guest check
Key operation
˚
1
g
1010
1
ı
Key operation
g
1010
c
˚
Display
Display
g
key, the