Electronic Journal/Data Clear; Electronic Journal; Data Clear - Sharp UP-800F Instruction Manual

13

Electronic Journal/Data Clear

■ Electronic journal

This function is intended to record the journal data in the electronic journal file (memory) instead of journal
paper. For details, contact your authorized SHARP dealer.
• Recording data
The POS terminal records the printing output to the journal printer in REG, PGM1, PGM2, X1/Z1, and X2/Z2
modes into the electronic journal file.
• Reporting (X report)
The POS terminal reports the journal data (same as normal journal formats) in the electronic journal file by
the report printer or the display.
Operation: Select the reading operation "E.JOURNAL" in X1/Z1 or OPXZ (only printing) mode.
It is possible to use filter functions (consecutive no./date/time/clerk code).
C.C. No. (Consecutive no.): ALL or RANGE (designate start no./end no.)
DATE (Date):
TIME (Time):
CLERK (Clerk code):
• Resetting (Z report)
It is possible to take the resetting report of the journal data in the electronic journal file by the report printer.
Operation: Select the resetting operation "E.JOURNAL" in X1/Z1 or OPXZ mode.
The filter functions (consecutive no./date/time/clerk code) can not be used.

■ Data clear

Use the following procedure to perform the data clear operation.
Procedure
▼
220
ALL or RANGE (designate start date/end date)
ALL or RANGE (designate start time/end time)
ALL or INDIVIDUAL (designate clerk code)
1.
In the PGM2 MODE window, select "4 DATA CLEAR".
• The DATA CLEAR window will appear.
2.
Select the pertinent operation.