Device Configuration Programming - Sharp UP-800F Instruction Manual

Device Configuration Programming

Use the following procedure to select a device configuration programming:
Procedure
▼
The screen continues.
The following illustration shows those options included in the device configuration programming group.
14 DEVICE CONFIG
200
1.
In the SETTING window, select "14 DEVICE CONFIG."
• The DEVICE CONFIG window will appear.
2.
Select any option from the following options list:
01 BUILT-IN PRINTER:
02 JOURNAL PRINTER:
03 RECEIPT PRINTER:
04 SLIP PRINTER:
05 KP#1:
06 KP#2:
07 KP#3:
08 KP#4:
09 KP#5:
10 KP#6:
11 KP#7:
12 KP#8:
13 KP#9:
14 BCR(SCANNER):
15 SCALE:
16 ONLINE:
17 POLE DISPLAY:
01 BUILT-IN PRINTER
02 JOURNAL PRINTER
03 RECEIPT PRINTER
04 SLIP PRINTER
05 KP#1
06 KP#2
07 KP#3
08 KP#4
09 KP#5
10 KP#6
11 KP#7
12 KP#8
13 KP#9
14 BCR (SCANNER)
15 SCALE
16 ONLINE
17 POLE DISPLAY
➡
See "Built-in printer" on page 201.
➡
See "Journal printer" on page 201.
➡
See "Receipt printer" on page 202.
➡
See "Slip printer" on page 202.
➡
See "Remote printer" on page 203.
➡
See "BCR (SCANNER)" on page 204.
➡
See "Scale/On-line" on page 204.
➡
See "Scale/On-line" on page 204.
➡
See "Pole display" on page 204.
Built-in printer
Journal printer*
Receipt printer
Slip printer
Remote printer #1
Remote printer #2
Remote printer #3
Remote printer #4
Remote printer #5
Remote printer #6
Remote printer #7
Remote printer #8
Remote printer #9
Scanner
Scale
On-line
Pole display