Bcr (Scanner); Scale/On-Line; Pole Display - Sharp UP-800F Instruction Manual

■ BCR (SCANNER)

Procedure

■ Scale/On-line

Procedure

■ Pole display

Procedure
204
Program each item as follows:
• CHANNEL# (Use the numeric entry)
Channel number (0 through 7)
When you program as "0", no RS-232 channel is assigned.
• BAUD RATE (Use the selective entry)
Transmission speed (baud rate)
19200 bps/9600 bps/4800 bps
• DATA BITS (Use the selective entry)
Data bit: 7 bits/8 bits
• PARITY (Use the selective entry)
Parity bit: NON/ODD/EVEN
• STOP BIT (Use the selective entry)
Stop bit: 1 bit/2 bits
Program each item as follows:
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as "0", no RS-232 channel is assigned.
Program each item as follows:
• WAITING TIME (Use the numeric entry)
Waiting time until the message is displayed on the pole display
(1 to 999)
When you program as "0", no message is displayed.