Key Data Entry Job Table Programming; Capture Job Number - Sharp UP-600 Instruction Manual

Key Data Entry Job Table Programming

Use the following procedure to select the menu option "22 CAPTURE JOB#" :

Capture job number

You can program a max. of 99 capture job numbers.
Select a pertinent
job number.
The screen continues.
Program the item as follows:
• CAPTURE JOB# (Use the selective entry)
Select the pertinent capture Job number. (1 to 99)
• MESSAGE (Use the character entry)
Description for the job (display message). Up to 12
characters can be entered.
(for job#1 thru 4)
• ENTRY#1 thru 4 (Use the selective entry)
Data entry type
NUMERIC:
CHARACTER: Character data type
INHIBIT:
• MAX. LENGTH#1 thru 4 (Use the numeric entry)
Max. length of data entry (0 to 13)
"0" means the ENTER key entry only.
• MIN. LENGTH#1 thru 4 (Use the numeric entry)
Min. length of data entry (0 to 13)
• TEXT PRINT#1 thru 4 (Use the selective entry)
YES: Prints the entry data on R/J or Bill printer.
NO:
ENTER
NOTE
• If the
selected job table will be deleted.
Numeric data type
Data entry is inhibited.
Does not print the entry data.
key is pressed on the job number selection menu, the
DEL
191