Switch Components - HP StorageWorks 8B - FC Entry Switch Reference Manual

Product Specifications
This appendix provides the following information:
•
•
•
•
•
•
•
•
•
•
•

Switch Components

The FC Entry Switch 8B or FC Switch 8B consists of the following components:
•
•
•
•
•
•
•
Installation and Reference Guide
Switch Components on page A-1
Weight and Physical Dimensions
Facility Requirements on page A-2
Power Supply Specifications
Environmental Requirements
General Specifications on page A-3
Memory Specifications on page A-5
Optical Port Specifications on
Serial Port Specifications on
POST Specifications on page A-6
Regulatory Compliance on page A-7
A chassis designed to be mounted in a 1U rack space, with forced-air cooling that flows
from the fan side of the switch to the cable side.
Eight optical ports, compatible with SFP (small form factor pluggable) media.
One RS-232 serial port (DB9 connector) on the SFP media side.
One IEEE compliant RJ-45 connector on the SFP media side for use with 10/100 Mbps
Ethernet or in-band.
Human-readable labels (including IP address label) and bar code labels on the top of the
switch.
A total of 20 LEDs:
-
One LED on the SFP media side to indicate the overall switch status.
-
Two LEDs for each of the eight ports to indicate port status and link speed
information.
-
Two LEDs for the Ethernet port to indicate port status and link speed information.
-
One LED in the center of the fan side to indicate the overall switch status.
One universal input power supply.
on page A-2
on page A-3
on page A-3
page A-5
page A-5
Appendix
A
A-1