HP StorageWorks 8B - FC Entry Switch Reference Manual page 15

To install the switch in an HP rack:
1. Check contents of the shipping carton to verify all the required parts and hardware are
available.
2. Choose a mounting location in the rack for the switch.
3. Attach the rear rail-tray brackets to the rear rack uprights by installing each of the two
mounting brackets with one M5 Torx head screw with captive lock washer as shown in
Figure
Figure 2-2
Installation and Reference Guide
2-2.
Installing the Rear Rail-Tray Brackets
Installing and Configuring the Switch
2
2-5