HP StorageWorks 8B - FC Entry Switch Reference Manual page 14

2
Installing and Configuring the Switch
CAUTION
faces the rear of the rack. This mounting allows air to enter the front of the rack through the plenum
and to exhaust at the rear of the rack, similar to other rack-mounted equipment. This prevents
switch overheating that may cause it to fail.
2-4
(8) #8 Flat washer
(6) M5 Torx head screw with captive lock washer
(2) Rubber washer
(4) M5 U-type Tinnerman clip (HP rack only)
(4) #10-32 square Tinnerman nut (Compaq/Rittal rack only)
(4) #10-32 x 5/8 Phillips pan-head screw with attached lock washer
(Compaq/Rittal rack only)
(6) Spacer (Compaq/Rittal rack only)
(4) M5 flat washer (Compaq/Rittal rack only)
For proper airflow, the SFP media side of the FC Entry Switch 8B or FC Switch 8B
Installation and Reference Guide