GE PT920 Owner's Manual page 41

ge.com
Possible Causes What To Do
Oven will not work A fuse ha your home may * Replace tile tuse or reset tile circuit breaker:
be blown or the drcuh
breaker tripped.
Oven controls improperly set.
* See tile Using the Oven section.
Oven will notself-clean The oven temperature * _Mh)w the oven to cool and reset the controls.
is too high to set a
self-clema operation.
Oven con_cols improperly set.
* See tile Using the Self-Cleaning Oven section.
The probe is plugged into * Reulove the probe fl'ou] the oven.
the outlet in the oven.
"Crackling" or This is the sound of the • This is normal.
"popping" sound metal heating and cooling
during both the cooking mzd
cleaning functions.
Excessive smoking
Excessive soil.
* Touch the CLEAR/OFFpad. Open
tire windows to
during clean cycle rid the room of smoke. Wait tn]til OVEN LOCKED goes
<:,ft. _'Vipe up tire excess soil and reset the clean cycle.
Oven door will Oven too hot. * Allow the oven to cool below locking temperature.
not open after a
clean cycle
Oven not clean after a
Oven controls not properly set.
* See the Using the Self-Cleaning Oven secti_:,u.
clean cycle
Oven was heavily soiled. * (]lean up heavy spilh>vers heft>re starting the clean
cycle. Heavily soiled ovens u_ay need t{> sell:clean
again or for a h)u,_er_ period of time.
"LOCK DOOR"
The self-clean cycle has
* Close
tire oven door.
flashes in the display been selected but the
door is not closed.
"OVEN LOCKED"is on The oven door is locked * Touch tire CLEAR/OFFpad. Allow tire oven to cool.
when you want to cook because the temperature
inside the oven has not
dropped below the
locking temperature.
Control keys activate
or LCD changes
screens when I
open the oven door
The control panel is dirty
or there is residue from
liquid clem_ers.
• Clean the control panel with a xinegar and
water solution, and polish dry with a soit cloth.
See the Care and Cleaning section,
4/