GE PT920 Owner's Manual page 39

ge.com
Ovenrack
Oven Racks
_M1 oven racks may be cleaned by hand
with an abrasive cleaner or steel wool.
_Mter cleaning, rinse the racks with clean
water and (h_' with a clean cloth,
Tile oven racks may remain in tile oven
during sel6cleaning cycle without being
damaged.
If the racks become hard to slide, wipe
their side edges with a light coating oI
vegetable oil atier cleaning them by hand
or in the oven. This will help maintain
tile ease ot sliding tile rocks in and out
ot tile ()veil.
Control Panel
It's a good idea to wipe the control
panel after each use. Clean with mild
soap and water or vinegar and watei;
rinse with clean water and polish (h_'
with a soft cloth. _]/en cleaning, tile
control panel should be at room
temperature and not in direct sunlight.
Use ot other liquid cleane_ is not
recommended--the residue thev
leave behind may affect tile control.
Do
not rise abrasive cleansei_, strong
liquid cleanse_, plastic scorning pads or
oven cleaners on the control panel--they
will damage tile finish. A 50/50 solution
of vinegar and hot water works best.
Stainless Steel Surfaces (on some models)
Do notusea steel wool pad; it will scratch
thesurface.
To clean tile stainless steel sm_hce,
use wam_ sudsy water or a stainless steel
cleaner or polish. _Mwa):s wipe tile sm'fiwe
in the direction of the grain. Follow the
cleaner instructions tot cleaning tile
stainless steel s/mfhce.
To inquire about i)m'chasing stainless
steel appliance cleaner or polish, or to
find tile location of a dealer nearest you,
please call ore" toll-free nmnber:
National Parts Center
1.800.626.2002
ge.com
39