About" Menu - Epson EMP-30 User Manual

Sub-menu
Rear Proj.
Ceiling
Reset

"About" Menu

The "About" menu shows the setting details for the current image source.
The "Lamp" item appears as 0H for 0–10 hours, and after that, it appears in units of 1 hour.
Video (S-Video, Composite video)
Video Lamp
Audio Reset Lamp Timer
Setting Video Source
Advanced Video Signal
About
Reset All
: Select : Enter
Sub-menu
Lamp
Reset Lamp
Timer
Video Source
Video Signal
Input Signal
Frequency
SYNC
Polarity
SYNC Mode
Resolution
Refresh Rate
"Video" Menu "Setting" Menu
"Audio" Menu "Advanced" Menu
Use when projecting images from behind a translucent screen.
When set to "ON", the projected images are horizontally reversed.
Use when installing the projector to a ceiling. When set to "ON", the projected
images are horizontally and vertically reversed.
Resets all adjustment values for the "Advanced" menu functions except for the
"Language" setting to their default settings.
Press the [Enter] button to display the confirmation screen, and select "Yes".
Select "Reset All" to return all menu settings including settings for the
"Video" and "Audio" menus to their default settings. (p.26)
: 0H
Execute
: Video
: Auto (----)
Displays the cumulative lamp operating time.
When the lamp warning period is reached, the display characters appear in
red.
Initialises the lamp operating time. When this command is selected, the
cumulative lamp operating time is reset to the initial default value.
Displays the input source which is currently being projected.
Shows the video signal format.
(Does not appear when the input source is component video, RGB video or
computer.)
Displays the input signal settings.
(Does not appear when the input source is composite video or S-Video.)
Displays the horizontal and vertical scanning frequencies.
(Does not appear when the input source is composite video or S-Video.)
Displays the sync polarity.
(Does not appear when the input source is composite video or S-Video.)
Displays the sync attributes.
(Does not appear when the input source is composite video or S-Video.)
Displays the input resolution.
(Does not appear when the input source is composite video or S-Video.)
Displays the refresh rate.
(Does not appear when the input source is composite video or S-Video.)

"About" Menu

Using the Configuration Menus
"Reset All" Menu
Function
Computer/RGB video/Component video
(Analogue-RGB, YCbCr , YPbPr )
Video Lamp : 0H
Audio Reset Lamp Timer Execute
Setting
Video Source : Computer
Advanced
Input Signal : RGB
About Frequency : H ---.--kHz
Reset All V ---.--Hz
SYNC Polarity : H ------
V ------
SYNC Mode : ------
Resolution : --- x---
Refresh Rate : ---.--Hz
: Select : Enter
Function
Default
OFF
OFF
-
Default
0H
-
-
-
-
-
-
-
25