Rear
Remote control light-receiving area
( Setup Guide )
Receives signals from the remote control.
Base
Lamp cover (p.46)
Open this cover when replacing
the lamp inside the projector.
Front/Top
Control Panel
Security lock ( ) (p.59)
Fixing screw holes
These holes are for the fixing screws that are
used to secure the projector.
Air filter (air intake vent) (p.44
Prevents dust and other foreign particles from
being drawn into the projector. When replacing
the lamp, replace the air filter also.
Left Side
Base
Rear
Remote Control
Power inlet (p.6)
Connects the power cable.
49)
,
57