Replacing Consumables; Inserting The Battery - Epson EMP-30 User Manual

Replacing Consumables

This section describes how to replace the remote control battery, the lamp and the air filter.

Inserting the Battery

Use the following type of battery as a replacement.
1 CR2025 lithium battery
Be sure to read the Safety Instructions/World-Wide Warranty Terms before handling
the battery.
Procedure
1
2
3
Catch
New
battery
mark
Old battery
Cleaning

Replacing Consumables

Remove the battery holder.
While pushing the catch of the battery holder
inwards, pull the battery holder out.
Remove the old battery and insert the
new battery.
Check the position of the (+) mark inside the
battery holder to ensure that that battery is
inserted the correct way.
Insert the battery holder into the remote
control.
Push the battery holder in until it clicks.
Dispose of used batteries in accordance
with local waste disposal regulations.
45