Adjusting Computer Images; Automatic Setup - Epson EMP-30 User Manual

Adjusting the Image Quality
Procedure
1
2
3
After making the adjustment, press the [Menu] button to exit the configuration
menu.

Adjusting Computer Images

Automatic Setup

Automatic setup detects the status of the signals coming from the connected computer, and automatically
adjusts these signals so that the optimum images can be obtained. It involves adjustment of the following
three items: Tracking , Position and Sync .
16
Video
EPSON Cinema Filter : ON OFF
Audio Position
Adjust
Setting Brightness : 0 -
:
Advanced Contrast 0 -
About Color : 0 -
:
Reset All Tint 0 -
:
Sharpness 0 -
Color Mode Select [Theatre
Video Signal Select [Auto ]
Aspect Ratio : 4 : 3 16 : 9
Reset Execute
: Return : Select : Set
/
Video :
EPSON Cinema Filter ON OFF
Audio Position Adjust
Setting : -
Brightness 0
Advanced Contrast : 0 -
:
About Color 0 -
Reset All Tint :
0 -
Sharpness : 0 -
Color Mode Select [Theatre
Video Signal Select [Auto ]
Aspect Ratio : 4 : 3 16 : 9
Reset
Execute
: Return / : Select : Set
If "Auto Setup" in the "Video" menu is set to "OFF" (the default setting for this item is "ON"),
automatic setup is not carried out. If you press the [Auto] button on the remote control while
computer signals are being projected, adjustment will then be carried out.
Remote control
Enter
Auto ESC
If you press the [Auto] button while the E-Zoom or Freeze function is being used or while a
configuration menu or help menu is being displayed, the function will be cancelled when you
press the [Auto] button, and then the adjustment will be carried out.
Sometimes the signals may not be adjusted correctly depending on the type of signals being
output by the computer. In such cases, use the configuration menu commands to adjust the
tracking and sync settings manually. (p.17, 18)
Press the [Menu] button on the remote
control, and then select "Aspect Ratio"
+
from the "Video" menu.
+
+
For details on this operation, refer to "Using the
+
+
Configuration Menus". (p.27)
]
Press the [ ] and [ ] buttons to set the
aspect ratio to either "4:3" or "16:9",
+
and then press the [Enter] button.
+
+
+
+
]