Using The Brother Installer Application On The Cd-Rom To Configure Your Machine For A Wireless Network - Brother MFC-9970CDW Network User's Manual

Configuring your machine for a wireless network (For MFC-9560CDW)
q
Enter the user ID you wrote down in step a. Press OK. (For information how to type text, see the Quick
Setup Guide.)
Do one of the following:
If your Authentication method is EAP-TLS, go to step s.
For other Authentication methods, go to step r.
r
Enter the Password you wrote down in step a. Press OK. Go to step s.
s
To apply the settings, choose Yes. To cancel, choose No.
Do one of the following:
If you chose Yes, go to step t.
If you chose No, go back to step g.
t
The machine starts to connect to the wireless network you have chosen.
u
If your wireless device is connected successfully, the display shows Connected.
The machine will print your machine's wireless status report. If the connection failed, check the error
code on the printed report and refer to Troubleshooting in the Quick Setup Guide.
®
(Windows )
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Start Here OSX from the
CD-ROM menu.
Using the Brother installer application on the CD-ROM to configure your
machine for a wireless network
For installation, see Wireless configuration using the Brother installer application (For MFC-9560CDW)
on page 26.
3
3
23