Changing The Scan To Network Configuration Using A Web Browser - Brother MFC-9970CDW Network User's Manual

Web Based Management
Changing the Scan to Network configuration using a web
browser
Scan to Network allows you to scan documents directly to a shared folder on a CIFS server located on your
local network or the Internet. (For more information on the CIFS protocol, see the Network Glossary.) To
enable the CIFS protocol, check the box for CIFS on Configure Protocol from the Network Configuration
page.
See Network Scanning in the Software User's Guide for more details on Scan to Network.
Note
Scan to Network supports Kerberos Authentication and NTLMv2 Authentication.
You must configure the SNTP protocol (network time server), or you must set the date, time and time zone
correctly for Authentication.
a
Click Administrator Settings on the MFC-XXXX (or DCP-XXXX) web page, and then click
FTP/Network Scan Settings.
b
You can choose what profile numbers (1 to 10) to use for Scan to Network settings.
You can also store two user defined file names that can be used for creating a Scan to Network Profile
in addition to the seven present file names in Create a User Defined File Name. A maximum of 15
characters can be entered in each of the two fields.
After setting, click Submit.
c
Click FTP/Network Scan Profile on Administrator Settings page.
Now you can configure and change the following Scan to Network settings using a web browser.
 Profile Name (Up to 15 characters)
 Host Address
 Store Directory
 File Name
 Quality
 File Type
 File Size
 Use PIN for authentication
 PIN Code
 Auth. Method
 Username
 Password
Kerberos Server Address

Note
Scan to Network is available when Network server profiles are configured using Web Based Management.
6
6
59