Brother MFC-9970CDW Network User's Manual page 88

Troubleshooting
Brother machine cannot print or scan over the network.
Brother machine is not found on the network even after the successful installation. (continued)
Question
Is your Brother machine
assigned with an available
IP address?
(continued)
Interface Solution
wired/
®
1 (Windows
wireless
Click the Start button, All Programs (Programs for Windows
Accessories and Windows Explorer, and then My computer.
(Windows Vista
Click the
2 Double-click Local Disk (C:), Program Files or Program Files (x86)
for 64-bit OS users, Browny02, Brother, BrotherNetTool.exe to run the
program.
Note
If the User Account Control screen appears,
(Windows Vista
®
(Windows
3 Follow the on screen instructions.
4 Check the diagnosis by printing the Network Configuration List.
Note
The Network Connection Repair Tool will start automatically if you check
the Enable Network Connection Repair Tool box using Status
Monitor. Right-click on the Status Monitor screen, click Options, Details
and then click the Diagnostic tab. This is not recommended when your
network administrator has set the IP address to static, since it will
automatically change the IP address.
If the correct IP address and the Subnet mask are still not assigned even
after using the Network Connection Repair Tool, ask the network
administrator for this information, or visit the Brother Solutions Center at
http://solutions.brother.com/.
2000/XP, Windows Server
® ®
/Windows 7)
button and Computer.
®
) Click Continue.
7) Click Yes.
®
2003/2008)
®
2000),
8
83