Using The Brother Automatic Installer Application On The Cd-Rom To Configure Your Machine For A Wireless Network - Brother DCP 585CW - Color Inkjet - All-in-One User Manual

Note
The setting page is different, depending on the brand of access point / router. See the instruction manual
that came with your access point / router.
If you are using your Windows Vista
Note
To use a Windows Vista
the instruction manual that came with your access point / router.
1
Click and then Network.
2
Click Add a wireless device.
3
Choose your machine and click Next.
4
Input the PIN from the printed page and then click Next.
5
Choose your network that you want to connect to, and then click Next.
6
Click Close.
h
If the LCD shows Connected, the machine has successfully connected to your router or access point.
You can now use your machine in a wireless network.
If the LCD shows Connection Failed, the machine has not successfully connected to your router or
access point. Try starting from e again. If the same message is indicated again, reset the machine back
to the default factory settings and try again. For resetting, see Restoring the network settings to factory
default on page 124.
i
Press .
®
(For Windows
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite or
Initial Installation / Install MFL-Pro Suite from the CD-ROM menu.
(For Macintosh
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Start Here OSX from the
CD-ROM menu.
Using the Brother automatic installer application on the CD-ROM to configure
your machine for a wireless network
For installation, see Wireless configuration for Windows
for MFC-5490CN and MFC-5890CN) on page 38 and Wireless Configuration for Macintosh
Brother installer application (Not available for MFC-5490CN and MFC-5890CN) on page 58.
Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
®
computer as a Registrar, follow the instructions below.
®
computer as a Registrar, you need to register it to your network in advance. See
)
®
)
®
using the Brother installer application (Not available
3
3
®
using the
37