Step By Step Chart For Wireless Network Configuration; For Infrastructure Mode - Brother MFC-9970CDW Network User's Manual
Multi-ptotocol on-board ethernet multi-function print server and wireless ethernet multi-function print server
Hide thumbs
Also See for MFC-9970CDW:
- User manual (341 pages) ,
- Basic user's manual (222 pages) ,
- Advanced user's manual (110 pages)
Table of Contents
Advertisement
Configuring your machine for a wireless network (For MFC-9560CDW)
Step by step chart for wireless network configuration
For Infrastructure mode
a
Confirm your network environment. See page 11.
Infrastructure mode
Connected to a computer with a WLAN access
point/router
b
Confirm your wireless network setup method. See page 12.
Using the
WPS/AOSS™
control panel menu
(Automatic Wireless
mode)
(Recommended)
c
Configure your machine for a wireless network. See page 16.
See the Quick Setup
Guide
1
Supporting IEEE 802.1x
Wireless configuration and installing the printer driver have been completed.
Using the Setup
1
Wizard
from the
control panel
See the Quick Setup
Guide
Installing drivers and software (See the Quick Setup Guide)
Ad-hoc mode
or
Connected to a wireless capable computer
without a WLAN access point/router
Using the Brother
installer
application
Using WPS/AOSS™, a USB
1
network cable
See page 26
See page 10
Using the PIN
Method of Wi-Fi
Protected Setup
1
or
See page 24
3
3
3
9
Hide quick links:
Advertisement
Table of Contents
