Brother MFC-9970CDW Network User's Manual page 23

Configuring your machine for a wireless network (For MFC-9560CDW)
b
Press Menu.
c
Press a or b to choose Network.
Press OK.
d
Press a or b to choose WLAN.
Press OK.
e
Press a or b to choose Setup Wizard.
Press OK.
f
When WLAN Enable ? is displayed, press a or b to choose 1.On and press OK to accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
g
The machine will search for your network and display a list of available SSIDs.
Choose <New SSID> using a or b.
Press OK.
h
Enter the SSID name. (For information how to enter text, see the Quick Setup Guide.)
Press OK.
i
Using a or b, choose Ad-hoc or Infrastructure when instructed.
Press OK.
Do one of the following:
If you chose Ad-hoc, go to step k.
If you chose Infrastructure, go to step j.
j
Choose the Authentication method using a or b, and press OK.
Do one of the following:
If you chose Open System, go to step k.
If you chose Shared Key, go to step l.
If you chose WPA/WPA2-PSK, go to step m.
k
Choose the Encryption type None or WEP using a or b, and press OK.
Do one of the following:
If you chose None, go to step o.
If you chose WEP, go to step l.
l
Enter the WEP key you wrote down in step a. Press OK. Go to step o. (For information how to enter
text, see the Quick Setup Guide.)
m
Choose the Encryption type, TKIP or AES using a or b. Press OK. Go to step n.
3
18