Configuring your machine for a wireless network
Using the Brother automatic installer application on the installation CD-ROM to
configure your machine for a wireless network
For installation, see Wireless configuration using the Brother installer application on page 20.
Using the PIN Method of Wi-Fi Protected Setup
If your WLAN access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the
machine easily. The PIN (Personal Identification Number) Method is one of the connection methods
developed by the Wi-Fi Alliance
Registrar (a device that manages the wireless LAN), you can setup the wireless network and security
settings. See the User's Guide for your WLAN access point/router for instructions on how to access the
Wi-Fi Protected Setup mode.
Note
Routers or access points that support Wi-Fi Protected Setup have a symbol as shown below.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose WPS w/PIN Code.
Press OK.
e
When Network I/F switched to Wireless. is displayed, press OK to accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
f
The LCD will show an 8 digit PIN and the machine begins searching for a WLAN access point/router for
up to 5 minutes.
®
. By inputting a PIN which is created by an Enrollee (your machine) to the
3
3
3
18