Connecting The Power Cable; Using The Video Aux Jacks On The Front Panel - Yamaha DSP-Z11 Owner's Manual

Connections

Connecting the power cable

■ Connecting the AC power cable
Plug the supplied AC power cable into the AC inlet (AC IN) after all
other connections are complete, and then plug the AC power cable
into an AC wall outlet.
AC IN
To the AC wall outlet
■ AC OUTLET(S) (SWITCHED)
U.K. model ............................................................ 1 outlet
Korea model .............................................................. None
Other models .........................................................2 outlets
Use these outlet(s) to supply power to any connected components.
Connect the power cable of your other components to these
outlet(s). Power to these outlet(s) is supplied when this unit is
turned on. However, power to these outlet(s) is cut off when this
unit is turned off. For information on the maximum power or the
total power consumption of the components that can be connected
to these outlet(s), see "Specifications" on page 138.
38
En
Using the VIDEO AUX jacks on the front
panel
Use the VIDEO AUX jacks on the front panel to connect a game
console or a video camera to this unit.
Caution
Be sure to turn down the volume of this unit and other components
before making connections.
MAIN ZONE
MASTER
ON
ON/OFF
OFF
INPUT
SPEAKERS
AUDIO SELECT A B
MULTI
ZONE
SILENT CINEMA
YPAO
OPTIMIZER
MIC
PHONES
S VIDEO VIDEO L
S V
L
Game console or
video camera
PURE DIRECT
STRAIGHT PROGRAM MENU VOLUME
ZONE
ZONE ON/OFF CONTROLS
EFFECT
REC OUT/
ZONE 2 TONE CONTROL
ZONE 2 ZONE 3 ZONE 4
PUSH ENTER
HDMI IN USB
S VIDEO VIDEO L AUDIO R OPTICAL
VIDEO AUX
HDMI IN
AUDIO R OPTICAL
O
R
Recommended
Alternative